Madera Concepts Offers The Largest Selection of Automotive Wood
Restoration Services and O.E.M. Replacement Wooden Dash and Trim Parts On Earth!

 

JENSEN & JENSEN-HEALEY Wood Restoration

 

We can restore your Jensen & Jensen-Healey woodwork !


-  ANY YEAR  -  ANY MODEL  -

Call us Today  805-962-1579

 

Over time, the woodwork in any vehicle begins to show its age and we at Madera Concepts are dedicated to helping you get the wood trim in your vehicl back to looking “Showroom New”.... and we are proud to do our part in maintaining the Jensen-Healey “Heritage.”

If the wood in your Jensen & Jensen-Healey is showing its’ age -
Call or email us Today, we are at your service!

 

Click here to go to the Jensen GT' &

Jensen Interceptor section

1973 - 75  JENSEN-HEALEY MARK II & JH5
 

Important Notice:  This set will NOT fit the Jensen Healey Mark I -

This set fits the Mark II and JH5  ONLY !!!

FITS - Jensen Healey Mark II and JH5: August 1973 – August 1975;   VIN#s 13500 – 20504
 
We manufacture 4 of the wood components - the Left Dash Panel, the Clock/Filler Panel, the Radio/Temp Control Panel and the Glove Compartment Panel....BUT, you will need to send us your stock metal Ashtray panel, so that we can re-veneer it to match your new parts. ( or you can buy one of our metal ashtray panels )

The picture above, is our standard 5pc Jensen Healey Mark II & JH5 set in Burled Walnut. 

( You must send us your stock metal ashtray panel so that we can re-veneer it to match your new parts -

- or you can buy one of our metal ashtray panels )

The cut-out for the clock can be done in either the small panel that is just to the right of the steering wheel, or in the Glove Compartment Door, or it can be omitted if you wish.  We do not machine the clock cut-out, until we know where you want your clock cut-out....either in the small trim panel or in the Glove Box Door.  There are occassions where our customers want us to omit the clock cutout and we are glad we could accomodate.

Our Glove Box Door Replaces the stock plastic part, utilizing the stock lock mechanism.

 

 

   

Here you can see the difference between the stock Radio/Tempurature control panel and the panel that we make that

Replaces the Stock Tin Panel.

Normally we cut out the stock radio opening,but if you have a DINN mount radio,

just provide us your DINN mount cage & we can cut out that style of opening for you.

(custom machining charges apply)    

Above is a custom  panel we made for our customer's Jensen Healey Mark II.

This is the Left Dash Panel.  Please specifiy how many rocker switches you have, and their location, when placing your order. 

PLEASE NOTE:  Because these sets are designed for professional installation, we have purposely left the right end of this panel longer to accomodate the varying gaps we have seen between this panel and the steering column shroud.  Some "on site" trimming may be necessary to assure proper fitment.

Note:  You will need to send us your stock metal Ashtray panel, so that we can re-veneer it to match your new parts.  ( or you can buy one of our metal ashtray panels )
   
Burled Walnut                                                           Figured Grain Walnut
 
Below are the 3 most common wood types our customers order.

Our standard 5pc Jensen Healey Mark II & JH5 set in Burled Walnut. 

( You must send us your stock metal ashtray panel so that we can re-veneer it to match your new parts -

- or you can buy one of our metal ashtray panels )

 

 

Our standard 5pc Jensen Healey Mark II & JH5 set in Carpathian Elm Burl.  

( You must send us your stock metal ashtray panel so that we can re-veneer it to match your new parts -

- or you can buy one of our metal ashtray panels )

 

Our standard 5pc Jensen Healey Mark II & JH5 set in Figured Grain Walnut. 

( You must send us your stock metal ashtray panel so that we can re-veneer it to match your new parts -

- or you can buy one of our metal ashtray panels )

 

We also manufacture an Optional Instrument Panel for the Mark II & JH5 that really is the "Icing on the Cake".

!! NOTE:  This Panel will NOT fit Right Hand Drive Vehicles !!

NOTE:  We highly recommend that you order it along with your order for our standard 5pc Jensen Healey Mark II & JH5 set, that way we can veneer all the parts with the same veneer. 

- Fits LHD models ONLY -

 

Here is our Optional Instrument Panel for the Mark II & JH5 - installed in the stock dash. 

Please Note that our customer requested that we stain his Burled Walnut an extra dark color.

- Fits LHD models ONLY -

 

Our standard 5pc Mark II & JH5 Burled Walnut set WITH the Optional Instrument Panel. 

NOTE:  Optional Instrument Panel Fits LHD models ONLY !

 

Here is a closer picture of the same standard 5pc Mark II & JH5 Burled Walnut set WITH the Optional Instrument.

NOTE:  Optional Instrument Panel Fits LHD models ONLY !

 

Our standard 5pc Mark II & JH5 Figured Grain Walnut set WITH the Optional Instrument Panel.

NOTE:  Optional Instrument Panel Fits LHD models ONLY !

There is nothing better than to see a completed installation.

Below is our standard 5pc Jensen Healey Mark II & JH5 set in a gorgeous Carpathian Elm Burl

WITH the Optional Instrument Panel.

Important Notice:  This set will NOT fit the Jensen Healey Mark I -

This set fits the Mark II and JH5  LHD models ONLY !!!

FITS - Jensen Healey Mark II and JH5: August 1973 – August 1975;   VIN#s 13500 – 20504
 
1976  JENSEN  GT
 
Below are pictures of the stock woodwork in a Jensen GT
Jensen GT
Jensen GT
   

The "orangish-red / rust color" of this stock Jensen GT dash, is very typical of the color that Burled Walnut changes to over the years.  Many people think it was supposed to be that color, but it has just bleached out, faded and changed color over the years.  It was originally medium / dark brown.

If your substate is in good shape, and if your veneer is in good shape, we can Refinish your set.  Otherwise, we can Reveneer and Refinish it for you.  We can even change the wood type if you wish.

Or, if your woodwork is in really poor condition, we can manufacture you a brand new set...See Below.

This Jensen GT dashboard came to us in extremely poor condition.  Not only was the clear finish cracked, but the veneer was cracked and flaking off and completely missing.  Additionally, the layers of the substrate were delaminating.  But the good news was that we have the necessary Jigs, Fixtures and Tooling to make new ones. 

Here is a picture of the OEM Replacement Dashboard set we manufactured for the aforementioned customer.  They chose Carpathain Elm Burl even though the original dash was Burled Walnut.  They also had us change the size of the tempurature control opening to accomodate a VintageAir control module and had us machine the radio cutout to accept a DINN mount radio.  Custom work costs a bit more, but because it is YOUR car, it's worth every penny.

Keep in mind that we can do what it takes to get the woodwork in your Jensen GT looking showroom new - Refinishing, Reveneering or you can order a brand new OEM Replacement.

The paint is done....the interior is done....the woodwork is looking "showroom new".....Life is Good !!!

Below is the stock woodwork.  Notice how bleached out and faded it is.    It has lost nearly all its contrast, and has turned almost yellow.

After Refinishing, the wood looks darker, and closer to the medium - dark brown that it was when new.

Above is the Stock set.  You can see that the veneer has really faded in color.  It has lost nearly all its contrast, and has turned almost yellow.

Below is a stock set that we Reveneered and Refinished, but veneer on this customers' console had severly delaminated, so to add character, they requested that we "bookmatch" the replacement veneer.  The flash of the camera made that part look lighter than it really was.  Even if your console was covered in vinyl, we can veneer the metal part.

 

   

This customer requested that we stain their woodwork a

reddish color to help it complient the steering wheel and the cream colored interior.

This customer decided to have us just Refinish the stock panels, and

as you can see they really finish off the nicely restored interior.

 

Below are pictures that may be of interest to you. 

The parts and dashboard that look "new" are parts that we Reveneered and Refinished.

 

 

 

 

Jensen SP

 

Back to top of page

Select one of these to see Popular Wood Choices for Reveneering: 

Burled Walnut  OR  Carpathian Elm Burl
    (custom specialty veneers are available at an extra charge)

 

Since 1982, Madera Concepts® has proudly operated the nations’ “Number One” facility for complete restoration, reveneering and repair of automotive woodwork. We also manufacture the World’s Largest Selection of O.E.M. Replacement Dashboards and Interior Trim Components. We are Factory Authorized*. Our craftsmen treat each piece with the utmost care, and the attention paid to even the smallest of details is evident. Whether your damaged piece is 90 years old or from last years model, we can restore it to pristine condition.

Call or email us Today to find out how we can help you!!
805-962-1579

7am to 3:30pm (Pacific Time) Mon – Fri


restoration@maderaconcepts.com

 

Banner

 

- Links -

 

Madera Concepts  55 B Depot Rd, Goleta CA 93117   805-962-1579 

  

Proud to be an American Company

 Established  1982

maderaconcepts.com ©  2014